FasTray - A New Concept In Cable Tray

FASTRAY® ventilated cable trays are an ideal substitute for conduit and basket tray.

Features & Benefits:

· QUICK CABLE INSTALLATION, INSPECTION AND REPAIR.
The FASTRAY® cable tray system’s unique design allows for quick and easy cable installation, inspection and repair.

· MORE SAVINGS – REDUCED INSTALLATION COSTS.
The FASTRAY® cable tray system is normally installed without any conventional hardware (nuts and bolts), or numerous tools. All that is required is a flat headed screw driver, the unique connector bracket and the quick and easy FASTRAY® clip. Installation time is decreased, reducing installation costs and therefore increasing savings. Our fittings are shipped flat and are folded by hand in the field at the time of installation eliminating the need for costly field fabrication. By shipping the fittings flat, we are able to reduce freight and warehousing costs, therefore passing on the savings to the customer.
(Insert picture 1-2-3 from page 4 of the catalogue)

· SIMPLER DESIGN.
Alternate ladder tray systems require many different components or far more complex installation processes to achieve so called field labour savings. The FASTRAY® system is simplistic, utilizing fewer components and generates greater design load capacities.

· CSA & NEC APPROVED

FASTRAY® cable trays have met the following requirements:

- CSA Standard C22.2 no.0-M91 – General Requirements – Canadian Electrical Code Part II
- CSA Standard C22.2 no.126-M91 – Cable Tray Systems
- CSA Standard C22.2 no. 126.1-02 – Metal Cable Tray Systems
- NFPA 70-1999 National Electrical Code

FASTRAY® cable tray lengths were load tested to destruction under the auspices of CSA as per C22.2 No.126.1-02.
Load testing was conducted on a non-catalogue (customer specified) product. This aluminum tray had 100mm (4”) siderails vs. 50mm (2”). This model of FASTRAY® fulfills the requirements of CSA Load Class C with a design load of 97 kg/m (65lbs/ft).

FASTRAY® is a new lightweight alternative for installations requiring more protection and greater design load than either wire basket (Load Class ???) or communication channel (Load Class A – 37 kg/m). The FASTRAY® cable management system is not intended to replace traditional CSA Load Class C applications. Often times the designer is forced to use a more expensive Class C product because the particular application calls for a system that has a higher design load and greater width than what Load Class A has to offer.